How to Clean a Dirty Driveway

How clean is your dirty driveway? If you live in a climate with a significant amount of rainfall, it may be due to a good rinsing. Corrosive dirt, grime, and salt from the road collect on your driveway daily.

That build-up can take a toll on the concrete, leading to cracking and uneven wear. Plus, all that junky dirt and grime doesn’t look too great.

Thankfully, it’s not hard to clean your driveway again, even if it has certainly seen better days. With some elbow grease and your favorite easy driveway cleaning tips, you can have it looking spiffy in no time!

Apply a Degreaser to the Stain

You will need to mix the degreaser with warm water and use a stiff scrub brush or broom to apply it. Once the degreaser is applied, please wait a few minutes so that it has time to absorb into the stain. After that, use a pressure washer to thoroughly rinse and scrub off the degreaser and any grime that it has loosened.

Wear safety glasses to protect your eyes from the pressure washer and any debris it can create. After cleaning with the pressure washer, you can use a finishing product like a sealer to maintain your driveway’s clean and shiny finish.

Set Up Your Pressure Washer

You want to ensure the pressure washer is safely plugged into a GFCI-protected outlet. You will attach the garden hose to the inlet connector and turn on the water supply. Once all components are connected and tightened, adjust the pressure setting to the recommended psi setting for your cleaning surface.

After setting up the washer, you must test the spray on a small area to ensure the setting and spray pattern is appropriate. Once everything is set up, you can begin cleaning the driveway.

Work from side to side and top to bottom for the most effective and thorough cleaning. And clean up the mess and hose off the pressure washer’s attachments the next time you use it. If you are struggling with driveway cleaning and don’t know where to get help, you can visit pressure washing services or other recommendations from your family and friends.

Apply the Detergent to Your Driveway

Applying detergent to a dirty driveway is an essential step in the cleaning process. It is advisable to sweep any debris and dirt off the driveway before applying anything else. After the surface is cleared of loose dirt and debris, use a garden hose to wet the entire surface of the driveway.

Once the surface is completely wet, it’s time to apply the detergent. Start by pouring a few drops of detergent into a bucket of water, and use a stiff bristled broom or brush to spread it over the driveway evenly.

Rinse the driveway with the garden hose once the cleaning process is complete. This should leave your driveway clean and looking great.

Learning How to Clean a Dirty Driveway

Cleaning a dirty driveway can seem daunting, but with the right tools and supplies, it doesn’t have to be. Start cleaning your driveway today to keep it nice and looking great all year! Pressure washing, clearing debris, and washing stains can easily be done with the right products and techniques.

Call your local driveway cleaning specialists today for tips and advice.

We hope you enjoyed our blog; check out our website.